The official regulation size of a beer pong table is 8′ (2.44 m) long , 24” (61 cm) wide , and set at a height of 27.5” (70 cm). Though the distance will vary based on the choice of a 6 or 10 cup game, the distance between the front two cups in a 10 cup game is roughly 65” (165 cm).
It is played on a standard sheet of plywood (8 by 4 feet (2.4 by 1.2 m) of at least 1⁄2 inch (13 mm) thickness) placed on banquet tables , saw horses or similar objects between 20 and 30 inches (510 and 760 mm). The game uses a standard solo cup (4.75 inches (121 mm) height , 3.75 inches (95 mm) diameter).
The ideal beer pong table size should be 6 -10 feet . Anything less than that would congest the table and hinder with gameplay. Make sure the table has an appropriate height. Any taller and it’s hard to aim, any shorter and you can knock the table .
Process was to purchase 6 ft plastic table from Walmart, sand it down, coat it with 2 layers of white paint, then begin using acrylic paint to make your design, about 3-4 coats of paint then seal it with epoxy resin then it’s sealed and you can use water, alcohol, etc on the board and it won’t get ruined!
To Win : Games are played up to 9 or 11 points. If the game is played to 9, a beer is killed and filled every 3 points, if it is played to 11, a beer is killed and filled for every 4 points scored. Games are also always won by 2.
Beer Die Fundamentals – The Toss Start from Your Base. When playing the world’s most athletic sport, you must toss the cube underhand. The Die is Your Friend. Standing 16mm tall and weighing in at 4.1 grams, the die is undefeated at the table. The Throw is Within You. Your Release is Your Signature. It’s Just a Game.
Paint adheres far better to rougher matte surface plastics than to glossy plastics . Since most plastic is glossy, sanding is then an essential step. Lightly sand all surfaces to be painted with 180- to 220-grit sandpaper. Since plastic is soft, you can do the sanding by hand.
What you need to do is first prime your plastic surface with a primer meant for that type of surface and let that primer layer dry completely. Then you can paint with your acrylic paint on top of the primer, let it dry, and once dry, varnish with an acrylic paint varnish.
Outdoor table tennis tables need to be completely weatherproof if they are to be left outside all the time. You could use an indoor table tennis table outdoors for short periods of time, but you must ensure that it is not in direct sunlight and it must not get wet either. However, I would not recommend it.